Industries

Labels for Garment Factories: Numbering Stickers, Dry Lap Stickers and More

Garment numbering stickers and price gun — Bybsa Solutions

A garment factory runs on labels long before a single shirt reaches a buyer. Bundles in the cutting room carry numbers. Price and size details go on with a tagging gun. Cartons leave the finishing floor with barcode labels that have to survive a warehouse, a container and a store’s receiving dock. When one of those labels is missing, unreadable or the wrong size, the line slows down and someone starts writing by hand.

This guide is for merchandisers, store managers and production planners who buy labels for garment units. It covers the label types a factory typically needs, how to specify each one, and how to get a quote by size and quantity. Bybsa Solutions manufactures labels and stickers in its own factory in Bangladesh, so production lines can order directly from the maker.

Numbering stickers for gun tagging

Small numbering and price stickers applied with a hand-held labelling gun are the quickest way to mark garments, bundles and folded stock. The label comes off the roll and goes on the item in one squeeze of the trigger, which is why stores, boutiques and finishing sections use them.

Our Garment Gun Numbering Sticker comes in two sizes, 26 × 12 mm and 22 × 12 mm, with hot-melt glue. The product page lists the guns it is made to feed on, including Blitz, METO and OPEN types.

What to check before you order gun labels:

  • Gun model and label size. A gun is built for one label size. Give us the gun model, or send a short length of the labels you use now, and we will match it.
  • Number of lines. Single-line and multi-line guns use different labels. Check what your gun prints before you compare quotes.
  • Glue strength. Hot-melt glue holds well on fabric and card tags. If labels must peel off cleanly later, say so.
  • Quantity. These are consumables. Quote by your monthly use rather than a single order, so the price reflects a regular supply.

All our numbering labels are grouped in the numbering sticker category.

Dry lap stickers

Some buyer programmes call for a dry lap sticker as part of their labelling spec. We list a 24 × 48 mm dry lap sticker. Because each buyer’s spec sheet sets its own size, wording, layout and material, the best way to order is to send us the spec sheet (or an approved sample) with the quantity. We will confirm the size and material and quote against it.

A note on buyer names: when a product title includes a brand name, that only describes which spec the label follows. Bybsa Solutions is not appointed by, or connected to, any buyer brand. Your factory remains responsible for getting the buyer’s approval of the final label.

Carton and shipping labels

Export cartons need labels that stay readable all the way to the buyer’s warehouse: through humid storage, rough handling and sometimes weeks at sea. For that kind of life, use thermal transfer (TT) labels printed with a ribbon. The print sits on the surface as ink and does not fade with heat or light the way direct thermal print can.

Common carton sizes in our thermal transfer sticker category include 100 × 150 mm (4 × 6 inch), 100 × 100 mm (4 × 4 inch) and 100 × 75 mm (4 × 3 inch). Pick the size your buyer’s carton label template calls for; most templates state it.

For internal labels that only need to last a few days (bundle tickets, work-in-progress tags, temporary rack labels) direct thermal labels are cheaper, because they need no ribbon.

Ribbons for TT labels

A thermal transfer label is only as good as the ribbon that prints it. Match three things:

  • Type: wax for ordinary paper labels, wax-resin when the label must stand up to more rubbing. Ask about resin ribbons for synthetic labels or harsh conditions.
  • Width: equal to or a little wider than the label.
  • Ink side: ink outside or ink inside, depending on the printer.

We supply ribbons (we do not manufacture them). See the thermal barcode ribbon category for widths and types, or give us your printer model and label size and we will pair them.

Printers for the finishing floor

If you print carton labels in-house, the printer matters as much as the label. A 4-inch thermal transfer label printer covers most carton templates; heavy daily volumes call for an industrial model. We supply desktop and industrial barcode label printers from established brands, so the printer, ribbon and label can come from one supplier and one quote.

How to specify labels for a quote

Garment labels are quoted by size and quantity. A complete request gets a faster, more accurate price. Send:

  1. Label type: gun numbering sticker, dry lap sticker, TT carton label, DT label, or a custom label.
  2. Size: width × height in mm (or the buyer’s spec sheet).
  3. Quantity: per order and, if regular, per month.
  4. Roll details: core size and labels per roll if your printer or gun needs a particular roll.
  5. Printing: blank labels for you to print, or pre-printed (send the artwork).
  6. Delivery: factory address and the date the line needs them.

Every product page on bybsabd.com has an RFQ for Bulk button. You can also send the details on WhatsApp or call 01814-585858. Prices change with material and quantity, so check today’s price on each product page or ask for a bulk quote.

Why order from the label maker

Garment production does not wait. Ordering from a factory that converts its own labels gives a production line three practical advantages: one contact for many label types, consistent size and adhesive from one batch to the next, and a direct conversation when a buyer changes a spec at short notice.

Frequently asked questions

Can you make a gun label size that is not listed?

Send the gun model and the size you need. We will tell you whether we can make it and quote by quantity.

Should carton labels be DT or TT?

For export cartons, TT with a suitable ribbon. Direct thermal print can fade with heat and time, which is a risk on a long shipping route.

Can you print the buyer’s carton label for us?

Many factories print carton labels themselves because the data changes with every shipment. If your content is fixed, send the artwork and quantity and ask for a pre-printed quote.

Leave a Reply

Your email address will not be published. Required fields are marked *